|
|
|
Fisher's Pump can handle all your pump
needs. We have an experienced crew of
pump technicians ready to take care of
you and your needs.
Specializing in submersible pumps, jet
pumps, centrifugal pumps, turbine pumps,
gas engine pumps, pressure switches,
control panels, gauges, well seals,
pressure tanks, submersible cable,
installation, and repair.
Please come in or call for new pump
system quotes. Our knowledgeable staff
can discuss your options with you and
assist in choosing the correct equipment
for your application.
For repair or emergency pump service
please call and talk to our service
department. For after hours emergencies
please call and follow the instructions
on our automated answering system to
talk to an after hours pump technician.
After hours calls are for emergency pump
issues only and will incur after hours
service charges.
Pump Department Manager
Rich Gerig:
rich@fisherssupply.com |
 |
|
\
Constant pressure
systems are changing the standard for private
well systems all over the country. A private
water well is one of the best sources of water
for your home, but just as in municipal water
systems, water pressure may sometimes be
insufficient for the changing demands of the
home. If you have a problem with water pressure
in your home, you may have noticed that your
washing machine fills more slowly when your
dishwasher is running, or that your shower
sputters when your sprinkler turns on. You don’t
like it, but you live with it.
Now you have a
choice.
With a constant
pressure system, you don’t have to schedule your
day around your water usage. Franklin’s SubDrive
and MonoDrive constant pressure controllers
vastly improve your home water system. Using
variable speed technology, SubDrive and
MonoDrive continuously monitor water demand and
adjust the speed of your pump to provide the
water you need without pressure fluctuations.
Available in a wide variety of ratings.
Franklin
Electric’s SubDrive constant pressure controller
provides constant pressure by continually
adjusting the speed of the pump to match water
demand. Instead of draining and filling a large
tank, a SubDrive system pumps more or less water
as you need it. Finally, you’ll be able to run
the dishwasher, do laundry and water the lawn –
all at the same time!
For more
information about Franklin Electric Constant
Pressure Systems you can visit their online
demo:
http://www.constantpressure.com/
 |
FPS 4400
Tri-Seal
The
Standard FPS 4400 4" submersible pump
features the new TRI-SEAL floating stage
system. This new stage system improves
efficiency and protects against wear when
pumping abrasives (sand). All FPS 4400 pumps
are unconditionally guaranteed against sand
locking in abrasive well conditions for one
full year.
Features:
- 300
series stainless steel hub floats with the
impeller maintaining a positive seal
- Phenolic
washer provides down-thrust protection
- Celcon®
* impeller provides high efficiency
performance and abrasion resistance
- Noryl® *
diffuser and disc - proven abrasion
resistant material
- Floating
stage design allows impeller to float
independently
-
Removable, spring-loaded check valve
- Maximum
water temperature: 120 °F
- Ceramic
shaft sleeve and rubber discharge bearing
protect shaft and eliminate sand wear
- Powered
by Franklin Electric corrosion resistant
4" submersible motor
|
 |
VersaJet
Pro
Built for
easy customization, this pump covers a
variety of performance needs. With our
patent pending nozzle replacement system and
a small Allen wrench (included), the
internal nozzle can be replaced with any of
the three nozzles supplied to provide
standard performance, high pressure, or high
flow.
Features:
- Patent
Pending “Quick-Change” jet nozzle
replacement system
- Noryl®
impeller with stainless steel insert,
diffuser, jet nozzle and venturi
-
Heavy-duty cast iron case
- Ceramic
mechanical shaft seal
- Floating
stainless steel eye seal
- A.O.
Smith dual voltage motor: 115 or 230 V
- Pressure
gauge port
- Pressure
switch installed
- Built-in
drain plug
- Handles
water temperatures up to 120 °F and
shut-off pressures up to 90 psi
- 1” FNPT
discharge, 1.25” FNPT suction
- UL778
approved for indoor or outdoor use
*Note:
Noryl® is a registered trademark of G.E |
|
 |
Challenger
Series Pressure Tanks
Challenger
tanks are the industries fighting brand and
one of the more popular water tanks on the
market. Efficient and cost-effective,
Challenger tanks are designed with a
patented controlled action, double diaphragm
assembly that is completely contained in a
pre-pressurized air cushion that reduces
condensation and regulates diaphragm action.
Challenger
tanks have a threaded nut for easy
installation of pump stand, a welded
malleable elbow and an adjustable air
charge. Clean, airtight welds are achieved
using the most modern welding equipment
available. Challenger tanks are completed
with an appliance quality paint finish over
primer coat, which combines durability and
high luster.
Our diaphragms
are constructed with a FDA approved high
grade butyl. Challenger tanks true airflow
design means fewer problems with
condensation. Our diaphragms positive lock
internal clench ring cannot slip and does
not rely on the tank wall. The tank contains
a stainless steel port diffuser, and water
connection which directs water flow upward
and outward while locking the lower
diaphragm in place.
All of our
quality tanks are backed by a five year
written, limited warranty. Challenger tanks
are quality tested at four different stages
on the production line. Tests include helium
and high pressure tests to ensure the
structural integrity of every tank.
|
|
 |
DIY
Submersible Pump
Baron
brand "Do It Yourself" pumps
Baron pumps
have an exceptional history of durability
and trouble-free operation. Stainless steel
design and self-lubricating impellers offer
the best service for extreme conditions. The
Baron pump also includes the PENTEK® XE
Series, high-thrust motor for efficient
performance and years of extended service.
Shell – 304
Stainless Steel
Discharge –
High-density composite
resin
Discharge
Bearing – Nylatron®
Impellers –
Self-lubricating Noryl®
Diffusers –
Noryl
Suction Caps –
Noryl
Shaft and
Coupling – 304 Stainless
Steel
Intake –
High-density composite resin
Intake Screen
– High-density
composite resin
Cable Guard –
PVC
Check Valve –
Polyester Teflon®
Fasteners –
304 Stainless Steel
We do not
offer installation on the Baron series of
pumps. We sell the Baron pump as an over the
counter do it your self option. The Baron
line of pumps have proven to be good quality
and a dependable long lasting option for
those who wish to minimize the cost of
replacing a pump by doing the labor
themselves. Pricing on the Baron pumps start
at $345.00 for a 1/2 HP 4" submersible. |
|
 |
